400-021-8839
Language
HOME > PRODUCTS > Inductive sensors > Anti-Welding Slag Type Sensor > FBFT-18D05N2-DS12
FBFT-18D05N2-DS12
FBFT-18D05N2-DS12
TECHNICAL DATA  
Specification size: M18
Installation: Flush
Sensing distance: 5mm
Operating voltage: 10-30VDC
Output signal: NPN.NC
Connection mode: Connector M12,4-pin
Product length: 79mm
Max.ripple: <10%
No load current: <10mA
Maximum load current: 200mA
Leakge current: <0.01mA
Voltage drop max: <1.5V
Swithing frequency: 800Hz
Response time: 0.1mS/0.1mS
Swithing hysteresis: <15%(sr)
Repeat accuracy: <1.0%(sr)
Degree of protection: IP 67
Operating temperature: -25℃—+70℃
Temperature drift: <10%(sr)
Short circuit protection: Yes
Material active face: PTFE
Housing material: Metal
Led display: Yes
CE: EN 61000
Rohs: EN 62321
Electrical connection:  
Machine size map:  
REDUCTION FACTORS  
The values are reference values
St37 steel (Fe) Approx. 1
Stainless steel (V2A, 304) Approx. 0.78
Aluminum (Al) Approx. 0.43
Copper (Cu) Approx. 0.35
Brass (Br) Approx. 0.47
Copyright(C) 2008-2019 Dipsun All Right Reserved. Macher Industrial Electrical Equipment Co., Ltd.